Mold Cleaner Degreaser III industrial mold cleaner No. 45920

• No methylene chloride
• No chlorofluorocarbons (CFC’s)
• No 1,1,1 Trichloroethane
• Meets all current EPA and OSHA Regulations
• Nonflammable formulation

Slide(R) Mold Cleaner Plus Degreaser III provides a convenient method for removal of silicones, grease, oil and wax build-up on mold surfaces, etc. without the need for wiping. Ideal for cold molds, it leaves no residue so it cleans without wiping. It has a fast evaporating formulation and is non-flammable, non-conductive and non-abrasive.
NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.

Specs

No. 45920 aerosol
Net Wt. 20 oz. (16 fl. oz.).
No. 45901B 1-gallon size
No. 45905B 5-gallon size
No. 45955B 55-gallon drum
No. 45960 cylinder

Bookmark It

Hide Sites

Purging Compounds Add to “Green” Manufacturing

For plastics manufacturers, the three most common and costly forms of waste are scrap resin, lost time, and wasted energy. Hence, using an effective purging compound solution will reduce all of these sources of waste and lost profits. When performed haphazardly, purging any machine can be financially and environmentally expensive.

Using straight resin to remove the unwanted material from the barrel requires a large amount of time, resin, and energy to properly clean out the machine. Therefore, using an effective commercial purging compound like those offered by Slide Products can reduce waste in all of these areas. Sure, a purging compound costs more per pound when compared to straight resin. But the secondary costs of scrap, energy, and time associated with using straight resin more than exceed the costs of an effective purging compound. And with less scrap resin headed for the landfill, the environmental advantages of using a commercial-grade purging compound are obvious as well.

Slide offers two different purging compound options. The popular and easy-to-use PDQ is a water-based purging additive. It is simply mixed with a carrier resin to create a mixture that quickly and inexpensively removes the unwanted old resin from the machine; thus minimizing lost resin, time, and energy. Slide’s heavy-duty purging compound is the NPT. This ready-to-use formulation is simply added directly to the machine with no extra resin needing to be added. NPT works by chemically destabilizing the unwanted polymer, effectively liquefying the material so that it can more easily be flushed out of the barrel. And again, the use of NPT greatly speeds up the purging process and eliminates much of the wasted resin, energy, and time.

A training video on Slide’s purging compounds is available on our web site. Show this video to your purge prospects. And remember to promote our purge products as a solution to increase the “Green” aspects of a manufacturing process. A good purging compound improves a company’s “Green” position in both the environmental and profitability realms.

Bookmark It

Hide Sites

Molding with PVC resin or using flame retardant additives simply causes nothing but headaches for most molders. These materials are widely known to emit acidic gases during the molding process. And these gases cause frustration and problems for the molder. Gases can build up on the mold surface, leading to clogged vents or filled-in mold texture. We see two ways to help solve these situations. The reactive approach is to use a cleaner to help break down and remove these gas deposits after they are formed. Slide’s Resin Remover product is an excellent option for this approach. We also offer a proactive method of trying to prevent the gas from building up on the mold surface. By using Slide’s Mold Saver Release Agent the molder can work to neutralize these corrosive and damaging acidic vapors. Not only does this formulation help with releasing the part from the mold surface, it also contains a powerful base material that will work to eliminate the acidic vapors from the mold cavity as they are being emitted from the resin. So help your customers to be proactive when you run across molders working in these acid-rich molding situations. As always, free samples are available.

Bookmark It

Hide Sites

MOLD RELEASE

Mold release is most simply PAM for plastic molding.  Mold release is applied to the plastic injection mold so the part will easily fall out of the die without sticking.  If plastic parts stick to the mold and must be removed, the productivity of the machine is negatively impacted.  There are some basic questions that must be answered to select the proper Mold release;

1. What type of plastic is being used?
2. Is the part going to be painted?
3. Is the part going to be used in a food application?
4. Is the part going to be used in a medical application?
5. Does the part and molding process require frequent use of a release?

Take the survey online to get the recommended mold release that meets your requirements.   SURVEY  DOCUMENT

MOLD CLEANERS

Mold cleaners are used to clean the mold to prevent resin/grease build up on the mold.  Contamination on the mold can be transerred to the surface of the part causing quality issues and rework.  Mold cleaners are also used prior to storing the dies and prior to application of mold rust protection.  They are also used prior to putting a mold back into production to remove rust preventative.  Key questions to ask to choose the right mold cleaner

1. Plastic being cleaned
2. In process cleaning or bench cleaning
3. Temperature of the mold

Selecting the correct mold cleaner.  DOCUMENT

Bookmark It

Hide Sites

Knock Out Release Agent

Knock Out Mold Release (#46612N) is a non-silicone, paintable, and food-approved release utilizing a highly versatile lubricating oil. This is a mold release that will help to knock out all production problems. This release has been tested on and proved effective with both thermoplastic and rubber materials.

We formulated the Knock Out Mold Release as a direct alternative to some competitive products that have proven formidable over the years. Specifically, we envision this new Slide release as a competitive offering against the Stoner Rocket Release product (E-302). So keep the Slide Knock Out Mold Release in mind as an option when you see a customer using this competitive product.

Knock Out Mold Release has been priced aggressively to compete with the offerings from the other suppliers. This is a high productive release formulation that will provide more cycles and parts before reapplication is needed. So get a sample can out to your molders looking for a release agent that is fully paintable and food-approved. As always, free samples are available.

Bookmark It

Hide Sites