Janitorial Supplies Michigan – Amerisource Industrial Supply

RESTORATION             SEMI ANNUAL 1ST & 2ND FLOOR
                                            ANNUAL 3RD & UP
                                            MONTHLY INSPECTION

Products                                  Equipment
Extraction Cleaner               Tornado Vacuum CW30
TrafficSpotter                         Hot Water Extractor
Spotting Kit                             Floor Machine with solution tank
Protect-O                                 Carpet Brush for floor machine
Odor Counteract                   Pile Brush
Kraft paper                              50′ Extension cords
Furniture Tabs                       Pump Up Sprayer 
Carpet Shampoo
Defoamer 
Bonnet Cleaner
Carpet Bonnets

1. Review area and determine if shampooing and spotting is necessary
2. Remove moveable obstructions & set up caution signs
3. Vacuum carpet wall to wall
4. Apply Traffic spotter to traffic lanes with 3 gallon pump sprayer (hot water)
5. Spot carpet using spotting kit and guide
6. If traffic lanes are badly soiled shampoo with Floor machine.  Before starting spray shampoo on start area and work the machine side to side in a “Z” pattern.  Open solution tank and let shampoo solution drop on brush evenly as cleaning.
7. Fill extractor with 2oz/5gal solution of 2001 Extraction Cleaner. Add 1oz/gal of Nilium odor counteract to freshen the carpet and kill odors
8. Plug the extractor into an outlet farthest ahead of the direction of cleaning
9. Extract carpet with dual stroke method. Open trigger on the way up and vacuum on the return stroke.  Heavy soiled areas may need a second pass.  Be careful not to over wet the carpet.  The extraction of the water is the key to producing a cleaner carpet.  It is important to remove as much water as possible apply adequate pressure on the wand to produce maximum suction on the carpet.
10. Add defoamer to extractor as necessary.  The best way to add defoamer is to vacuum in through the extractor hose out of a cup. 
11. Return moveable obstructions
12. Place furniture tabs under metal furniture legs to prevent rust stains
13. Roll out Kraft paper on walking paths if area may not be completely dry before opening to pedestrian traffic
14. After completely dry pile brush to restore the carpet nap
15. If the carpet resoils due to wicking then bonnet clean the carpet.  Use the same method as step 6 but put a carpet bonnet on the floor machine vs using a brush.  This will clean the top fibers of the carpet that were resoiled as the carpet dried.
16. While the carpet is still dame apply carpet protectant with a pump up sprayer

Productivity    Shampooing            1000sq ft/hour
                               Extraction               1000sq ft/hour

Bookmark It

Hide Sites

Comments are closed.